Using The Best Screws For Particle Boards
Particle board has a reputation for being very brittle and difficult to fasten if you don’t know what you’re doing. Particle board might look like regular hardwoods but make no mistake they are not the same things at all. Because particle boards are much cheaper, they remain a common feature in a lot of wood products and if you intend to use them you need to know how to use these screws properly and safely with them.
How To Use Screws With Particle Board
First let’s look at how you should safely screw particle board, using the method detailed below you’ll be able to ensure your particle boards are strong and secure and ensure your own safety at the same time.
In order to make sure your screws will actually do their job and fasten the particle boards together make sure you follow these tips.
- Make sure you guide holes for your screws are drilled to be 85% of the screws diameter, take it slow and be precise.
- The guide holes should also be 1mm deeper than the total depth of the screw to ensure maximum strength and stability.
- If you’re screwing directly into the face of the boards make sure you at least 1 inch away from the edge of the wood.
- If screwing directly at the edges of the board make sure you’re at least 2.5 inches away from the end at all times.
- Don’t over tighten your screws because particle boards can easily crack during the screwing process.
- You can also try using screw and wood glue just drop a dash into the guide hole before screwing and it will help strengthen and secure the screw.
- Remember at all times take it slow and steady with whatever you’re doing.
What Type Of Screws Should I Use?
When it comes to using screws with particle boards there’s only a few options open to you the first is Spax screws.
These screws feature “teeth” at the front which makes them ideal for going into a variety of materials, when used with particle boards they will ensure the boards are secure but make sure you drill guide holes first and don’t try and directly screw them in.
Countersunk screws that feature parallel threads and recessed heads will also work in a similar manner so you can also consider using them.Click for The Best Particleboard Screws