Liberon Van Dyke Crystals ( traditional wood dye ):

Liberon Van Dyke Crystals are a traditional and natural water based wood dye made from walnut husks. Van Dyke Crystals produce a color ranging from a very light brown to dark brown depending upon the concentration.

Performance:

- Traditional method for coloring oak, mahogany and walnut

- Natural Dye made from walnut husks

- Intensity of colour is controlled by strength of dilution

How to Use Liberon Van Dyke Crystals:

Dissolve Van Dyke Crystals in hot water ( about 100 g to 1 L ). Test the colour on a spare piece of wood, darken by adding more Van Dyke Crystals and lighten by adding more water. To obtain different shades dye stain can also be added to the solution. Or the solution can be added to water based varnishes.

Applying Liberon Van Dyke Crystals:

Ensure the surface is bare, dry and free from dust. Apply Liberon Van Dyke Crystals with a brush, sponge or cotton rag and wipe of excess with a cloth. Allow to dry for at least 12 hours, then rub down lightly with abrasive paper 240 or 320 grit.

Important:

Always test product on a spare surface or inconspicuous area for color, compatibility and end result.

Precautions:

When using a water based varnish over the stain extra care must be taken on application of the first coat as over brushing may lift out the color.

Knowledge Base:

• Caring for Antiques and Fine Furniture

• About Furniture Polish

• Cleaning and Caring for Leather

• Antiques