Liberon Finishing Oil ( wood finishing oil ):

Liberon Finishing Oil is blend of high-quality oils for finishing wood surfaces which require a hard wearing natural finish. This Liberon product is water, heat, alcohol and food resistant. Liberon Finishing Oil is quick drying, low odor and an easy product to apply. Ideal for kitchens and bathrooms, and other areas in which wood surfaces get daily use. Liberon Finishing Oil contains pure tung oil. Finishing Oil can also be applied to cork, stone and terracotta.

How To Use:

Ensure the surface is bare: remove any wax finishes with Wax & Polish Remover and any varnish finishes with wood stripper. Clean, dry and ensure the surface is dust free. If required stain the wood with wood dye before oiling.

Application:

Shake Liberon Finishing Oil well before use. Apply a coat of Liberon Finishing Oil using a brush or lint-free cotton cloth. Allow the oil to penetrate for up to 10 minutes then wipe off all the excess with a clean lint-free cloth, before the surface dries enough to become sticky. Allow to dry for a minimum of 5 hours and apply more coats as required. We recommend a minimum of 3 coats. The more coats applied the higher the sheen and the more durable the finish will be. For best results gently rub with extra fine steel wool between coats. Furniture items may be finished with paste wax for an improved lustre.

Important:

Oil finishes bring out the natural colors of wood. A wet surface will be an indication of the final wood color. Always test Liberon Finishing Oil on a spare surface or inconspicuous area for color, compatibility and end result.

Cleaning and maintenance:

Surfaces may be cleaned using a damp cloth and spills should be wiped up immediately. For stubborn stains a mild detergent can be used. Surfaces need to be re-oiled with finishing oil once a year or more, depending upon usage. 

Knowledge Base: